remove deepfreze password

Posted by Avans | 11.04

To is handicap smooth away deepfreeze version 6 since i forgot the password, after I look for" at eventual Google gets also remove this trick programs...

Equipment that at requires:

• Deep Freeze's program version that equals deepfreeze that

troublesome (computer 1).

• 1 Computer (computer 2)

• Live is Linux / XP / ReactOS's CD (at the discretion pengen pake live the other CD

may also one be of important that access hardisk can computer).

Stage who shall at sails through:

1. get deep freeze version of the computer that you lost each password (computer 1)

2. you should have an operating system which is same version as the computer 1

3. Install deep freeze program where it have the same version at other computer (computer 2) then restarts, keep the password empty, and check Thawed mode and then restart your computer (deepfreeze is not active).

4. Insert Live CD OS we go to room's CD target computer (computer 1) then makes boot to go to Live that CD then reboot (you can use storage disk).

5. Copy file persi0.sys it commonly locate on c:\ on computer 2 to your Flash Disks or the other storage media.

6. Then paste is persi0.sys's file on computer 1 at c:\ if there is rewrite aja's same file or del before same file then copykan is file a new one.

7. Reboot computer 1 and set boot into hard disk

8. All through, computer 1 have locked deep freeze and also this mode will have same mode with computer 2 than give a new password as you want to

If you need more info on any command listed here, type /help {command} in mIRC. The list here is far from complete!
/ Recalls the previous line entered in the current window.
/! Recalls the last command typed in any window.
/action {action text} Sends the specifed action to the active channel or query window.
/ame {action text} Sends the specifed action to all channels which you are currently on.
/amsg {text} Sends the specifed message to all channels which you are currently on.
/auser {level} {nick|address} Adds a user with the specified access level to the remote users list.
/auto [on|off|nickname|address] Toggles auto-opping of a nick or address or sets it on or off totally.
/away {away message} Sets you away leave a message explaining that you are not currently paying attention to IRC.
/away A plain away sets you being back.
/ban [#channel] {nickname} [type] Bans the specified nick from the curent or given channel.
/beep {number} {delay} Locally beeps 'number' times with 'delay' inbetween the beeps. /channel Pops up the channel central window (only works in a channel).
/clear Clears the entire scrollback buffer of the current window.
/clearall Clears all text in all open windows.
/ctcp {nickname} {ping|finger|version|time|userinfo|clientinfo} Does the given ctcp request on nickname.
/ctcps [on|off] Sets the Tools/Remote/ section (not) to listen to CTCP commands. Or checks its status.
/closemsg {nickname} Closes the query window you have open to the specified nick.
/creq [ask | auto | ignore] Sets your DCC 'On Chat request' settings in DCC/Options.
/dcc send {nickname} {file1} {file2} {file3} ... {fileN} Sends the specified files to nick.
/dcc chat {nickname} Opens a dcc window and sends a dcc chat request to nickname.
/dde [-r] {service} {topic} {item} [data] Allows DDE control between mIRC and other applications.
/ddeserver [[on [service name] | off] To turn on the DDE server mode, eventually with a givem service name.
/describe {#channel} {action text} Sends the specifed action to the specified channel window.
/disable {#groupname} De-activates a group of commands or events.
/disconnect Forces a hard and immediate disconnect from your IRC server. Use it with care.
/dlevel {level} Changes the default user level in the remote section.
/dns {nickname | IP address | IP name} Uses your providers DNS to resolve an IP address.
/echo [nickname|#channel|status] {text} Displays the given text only to YOU on the given place in color N.
/enable {#groupname} Activates a group of commands or events.
/events [on|off] Sets the Tools/Remote/ section (not) to listen to ON .. Events. Or checks its status.
/exit Forces mIRC to closedown and exit.
/finger {nick|address} Does a finger on a users address.
/flood [{numberoflines} {seconds} {pausetime}] Sets a crude flood control method.
/flush [levels] Clears all nicknames from the Remote/users list that are currently not on your channels.
/font Activates the font selection dialog.
/fsend [on|off] Shows fsends status and allows you to turn dcc fast send on or off.
/fserve {nickname} {maxgets} {homedirectory} [welcome text file] Opens a fileserver.
/groups [-e|d] Shows all (enabled or disabled) groups defined in the remote sections.
/guser {level} {nick} [type] Adds the user to the user list with the specified level and address type.
/help {keyword} Brings up the Basic IRC Commands section in the mIRC help file.
/ignore [on|off|nickname|address] Toggles ignoring of a nick or address or sets it on or off totally.
/invite {nickname} {#channel} Invites another user to a channel.
/join {#channel} Makes you join the specified channel.
/kick {#channel} {nickname} Kicks nickname off a given channel.
/list [#string] [-min #] [-max #] Lists all currently available channels, evt. filtering for parameters.
/load {-apuce} {filename.ini} Loads Aliases, Popups or Remote items into mIRC.
/log [on|off] Shows the logging status or sets it on or off for the current window.
/me {action text} Sends the specifed action to the active channel or query window. Also see /describe and /ctcp action.
/mode {#channel|nickname} [[+|-]modechars [parameters]] Sets channel or user modes.
/msg {nickname} {message} Send a private message to this user without opening a query window.
/names {#channel} Shows the nicks of all people on the given channel.
/nick {new nickname} Changes your nickname to whatever you like.
/notice {nick} {message} Send the specified notice message to the nick.
/notify [on|off|nickname] Toggles notifying you of a nick on IRC or sets it on or off totally.
/onotice [#channel] {message} Send the specified notice message to all channel ops.
/omsg [#channel] {message} Send the specified message to all ops on a channel.
/part [#channel] [message] Makes you leave the specified channel.
/partall Makes you leave all channels you are on.
/ping {server address} Pings the given server. NOT a nickname.
/play [-cpqmrlt] [channel/nick] {filename} [delay/linenumber] Allows you to play text files.
/pop {delay} [#channel] {nickname} Performs a randomly delayed +o on a not already opped nick.
/protect [on|off|nickname|address] Toggles protection of a nick or address or sets it on or off totally.
/query {nickname} {message} Open a query window to this user and send them the private message.
/quit [reason] Disconnect you from IRC with the optional byebye message.
/raw [on|off] Sets the Tools/Remote/ section (not) to listen to Raw commands. Or checks its status.
/raw {raw command} Sends any raw command you supply directly to the server. Use with care!
/remote [on|off] Sets the Tools/Remote/ section (not) to listen to CTCP or Raw remote commands and Events. Or checks its status.
/rlevel {access level} Removes all users from the remote users list with the specified access level.
/run {c:\path\program.exe} [parameters] Runs the specified program, evt. with parameters. Also try /run h**p://w*w.mirc.com etc.
/ruser {nick[!]|address} [type] Removes the user from the remote users list.
/save [-apuce] {filename.ini} Saves remote sections into a specified INI file.
/say {text} Says whatever you want to the active window.
/server [server address [port] [password]] Reconnects to the previous server or a newly specified one.
/sound [nickname|#channel] {filename.wav} {action text} Sends an action and a fitting sound request.
/speak {text} Uses the external text to speech program Monologue to speak up the text. Better use /gtalk with mIRC's Agent support.
/sreq [ask | auto | ignore] Sets your DCC 'On Send request' settings in DCC/Options.
/time Tells you the time on the server you use.
/timer[N] {repetitions} {interval in seconds} {command} [| {more commands}] Activates a timer.
/timestamp [on | off] Sets timestamping on or off for all your conversations.
/topic {#channel} {newtopic} Changes the topic for the specified channel.
/ulist {level} Lists all users in the remote list with the specified access levels.
/url [on|off|show|hide] [address] Opens the URL window that allows you to surf the www parallel to IRC.
/uwho [nick] Pops up the user central with information about the specified user.
/splay {c:\path\sound.file} Locally plays the specified sound file.
/who {#channel} Shows the nicks of all people on the given channel.
/who {*part.of.address*} Shows all people on IRC with a matching address.
/whois {nickname} Shows information about someone in the status window. Also try /uwho.
/whowas {nickname} Shows information about someone who -just- left IRC.
/write [-cidl] {filename} [text] To write the specified text to a .txt file.

what is SQL injection

Posted by Avans | 13.48

A SQL injection vulnerability can occur when a poorly-written program uses user-provided data in a database query without first validating the input. This is most-often found within webpages with dynamic content. There are some excellent tutorials and descriptive articles on this subject, as well as many vulnerability postings for different applications from full-disclosure websites.

A simple example of SQL injection is a basic HTML form login in which you provide a username and password:

Code:
'



'


Given this snippet of HTML, one can deduce that the easiest (and worst) way for the script "process_login.php" to work would be for it to build and execute a database query that looks like this:

Code:
 "SELECT   id
FROM logins
WHERE username = '$username'
and password = '$password'";


Under those circumstances, if the variables "$username" and "$password" are taken directly from the user's input, the login script can easily be tricked into believing that a valid password has been provided by playing with the syntax of the SQL statement. Suppose the following string were provided as the password:

Code:
 ' or '' = '


and we gave "bob" as the username. Once the variables are interpolated, the query above would look like this:

Code:
"SELECT   id
FROM logins
WHERE username = 'bob'
and password = '' or '' = ''";


This query will return a row because the final clause:

Code:
 ... or '' = ''

will always evaluate to true (an empty string is always equal to an empty string).